Food products are mass produced in the modern era. They are manufactured in batches or consignments of thousands or millions. This makes it impossible for their manufacturers to individually inspect and approve each item. This does not mean, however, that defects are never encountered. So, where a batch has as defect, there is a threat to the public's health and the manufacturer needs to be able to trace the batch and eliminate the products from the market. Food traceability software systems are one way of doing this.
The two primary reasons for problems with food products are that they are either too old to be sold or they are a health hazard to the public. When a product is legally too old to be on the market, this does not automatically mean that it is unhealthy. It simply means that the legal expiry date has passed. The product is then not permitted to be on the shelf. The retailer is not allowed to sell it, even though it is still fit for consumption.
But the other reason is more serious. One would expect this to be limited to the perishable products like fresh fruit and vegetables and dairy, but even tinned foods and long-storage cereals suffer from the issue of decomposition. Once this has set in, the product is genuinely useless and cannot be consumed, let alone sold.
Software systems are used to mark, monitor and track food products. The manufacturer can locate a batch and then ask for it to be withdrawn from the market using these systems. This is important if the need arises to withdraw or recall a batch of products.
The public, however, can also take steps to ensure that what they buy is still fit for consumption. The trouble is that any system of recording, tagging and location can be manipulated by retailers and producers. The date that you see on the product is not always the correct expiry date. There are certain things that consumers can check themselves to protect themselves from this unscrupulous practice.
Canned goods are especially easy to check by the consumer because the metal changes shape as the product goes off. If the can is inflated, the contents are rotting, which may also mean that air has entered into the can. If the can is at all dented, punctured or rusted then it should not be purchased.
Some products are specifically marketed as long-life or long-term. But this does not mean that they never expire. The temptation for retailers is to stock them for a long time, so that even after one or two years they still have not past their expiry date. But they may yet be expired. If the retailer refuses to remove them from the shelves, the consumer has the right to contact the authorities or the manufacturer.
The flavor or quality of the product is not the only consideration when it comes to expired food products. Public health is important and expired foodstuffs can cause disease and death. These products should be detected and removed from the market as a matter of course.
The two primary reasons for problems with food products are that they are either too old to be sold or they are a health hazard to the public. When a product is legally too old to be on the market, this does not automatically mean that it is unhealthy. It simply means that the legal expiry date has passed. The product is then not permitted to be on the shelf. The retailer is not allowed to sell it, even though it is still fit for consumption.
But the other reason is more serious. One would expect this to be limited to the perishable products like fresh fruit and vegetables and dairy, but even tinned foods and long-storage cereals suffer from the issue of decomposition. Once this has set in, the product is genuinely useless and cannot be consumed, let alone sold.
Software systems are used to mark, monitor and track food products. The manufacturer can locate a batch and then ask for it to be withdrawn from the market using these systems. This is important if the need arises to withdraw or recall a batch of products.
The public, however, can also take steps to ensure that what they buy is still fit for consumption. The trouble is that any system of recording, tagging and location can be manipulated by retailers and producers. The date that you see on the product is not always the correct expiry date. There are certain things that consumers can check themselves to protect themselves from this unscrupulous practice.
Canned goods are especially easy to check by the consumer because the metal changes shape as the product goes off. If the can is inflated, the contents are rotting, which may also mean that air has entered into the can. If the can is at all dented, punctured or rusted then it should not be purchased.
Some products are specifically marketed as long-life or long-term. But this does not mean that they never expire. The temptation for retailers is to stock them for a long time, so that even after one or two years they still have not past their expiry date. But they may yet be expired. If the retailer refuses to remove them from the shelves, the consumer has the right to contact the authorities or the manufacturer.
The flavor or quality of the product is not the only consideration when it comes to expired food products. Public health is important and expired foodstuffs can cause disease and death. These products should be detected and removed from the market as a matter of course.
About the Author:
Get details about the advantages you get when you use food traceability software systems and more information about a great software program at http://www.parityfactory.com now.
0 comments:
Post a Comment